steam cylinder的例句大全

Thermal stress rectification of steam cylinder deformation

汽缸变形的热应力矫正

Through analysis of performance test for high temperature bolts on joint face of the steam cylinder, it is believed that the main factors affecting the safe application performance of high temperature bolts are undue and nonhomogeneous pretightening loads.

通过对汽缸结合面高温螺栓的性能试验分析，认为预紧力过大和预紧力不均匀是影响高温螺栓安全使用性能的主要因素。

Improvement of Synthetic Steam Cylinder Oil Production Process

合成蒸汽汽缸油生产工艺的改进

Service life loss of high temperature bolts on joint face of the steam cylinder and analysis for safe application performance thereof

汽缸结合面高温螺栓寿命损耗及其安全使用性能分析

Study on Measure for Steam Cylinder Shim Block of Positional Tolerance and Wire Profile Tolerance

汽缸垫片位置度与线轮廓度测量研究

Tipped Shell Reamer for Finishing the Hole of Steam Cylinder

加工汽缸内孔用镶片套式精铰刀

For example, the steam cylinder bolt for ultra-supercritical turbine requires not only enhanced high temperature strength and ductility, but also good corrosive and wearing resistance.

例如：用于超超临界汽轮机组的汽缸螺栓，不但要求具有足够高的高温强度和韧性，而且要求良好的抗腐蚀和耐磨性能。

Steam in a cylinder expands to push a piston outward.

气缸中的蒸汽膨胀并推动活塞向外运动.

The cylinder can be heated by steam, electric or oil.

滚筒具有蒸汽加热 、 电加热及油加热三种方式.

In retrofit applications, the EHPS can directly replace the existing steam valve power cylinder operating system.

在改造中的应用, ehps可以直接取代现有的蒸汽阀的权力缸作业系统.

Electrohydraulic Power Cylinder ( EHPC ) provides the force to operate the control valves of a steam turbine.

电功率缸 ( ehpc ) 提供了部队操作控制阀的汽轮机.

The steam was condensed rapidly by injecting cold water into the cylinder.

由于汽缸中注入了冷水，蒸汽迅速凝结了。

This dry steam is further super-heated and then fed to the HP cylinder of the turbine.

干蒸汽被进一步过热,然后被供给气轮机的高压缸.

Heat is used to raise steam which either turns a turbine or forces a piston to move up and down in a cylinder. chamber, combustion, for turbojets or turbopropellers

由热产生的水蒸气或者使涡轮旋转或者使活塞在气缸中上下运动。燃烧室，用于涡轮喷气发动机或涡轮螺旋桊发机

The rugged design of this steam engine is unusual in combining the functions of crosshead guide and cylinder support in a single set of columns.

崎岖的设计，这蒸汽机是不寻常的结合，职能十字头，引导和支持在缸一套单一的栏目。

Repair welding for cracks on No.1 steam turbine cylinder in Nanhai A Power Plant

南海市发电A厂1号机汽缸裂纹的补焊处理